Running boards for Jeep Wrangler


While many cars are very functional, some due to their ride height can be difficult to get in and out of. That is where running boards, nerf bars and side steps come to the rescue. However, there is quite a common query regarding these but something that people are unable to find easy answers to. The query can take different forms but basically ask "What is the difference between running boards, nerf bars and side steps?” If you have a similar question then do not worry. We will answer these questions in detail while also providing you with a great option if you happen to own a Jeep Wrangler JK. Let us take a detailed look at each one of these individually.


Running Boards

These are the ones usually seen on SUVs. There is a metallic piece attached underneath the car just in front of where the doors open. They stretch the entire length of the doors and cover the front as well as the back seats. They are usually the strongest of the three and can support up to 500 lbs. of weight. They are also the most visually prominent of the three and can alter the external look of your car quite considerably. They usually attach to two points on the car and despite their relatively large demeanor and higher weights can be easily installed using a few nuts and bolts and some basic rudimentary tools. If structural integrity is what you are looking for and do not mind sacrificing the looks a bit then this is the one to choose.


Running boards


Advantages of Running Boards:

1. Can support the most weight among the three
2. People exiting or entering the car can pretty much do it blindly as a running board covers the entire side of the car
3. Are great to install lights and spice up your ride


Disadvantages of Running Boards:

1. They are quite heavy
2. Have sharper ends that can cause injury


Nerf Bars

These owe their existence to racing. As most race events are such that multiple cars run in close proximity trying to overtake each other, it is only natural that there is a lot of scraping and jostling involved. To prevent the cars from getting entangled in each other or cause race-ending damage to each other bent metal pipes were attached to the sides of the car. These would take the impacts and keep the rest of the car in good shape. Kinda like a fender for the sides. The consumer version of the nerf bar has a more practical approach and is not meant for racing. It is also known as a tube step for obvious reasons. The metallic tube has a bent shape with the edges tapering into the car. There are also individual steps underneath each door. It is easier on the eyes and doesn't mess up the looks of the car. It can support weights of up to 300 lbs. A great example is the Oedro Nerf Bars for Jeep Wrangler JK, more on that later.


Nerf bars


Advantages of Nerf Bars:

1. Are much more visually striking
2. Are lighter and therefore put less strain on the car
3. Have a smooth profile with no sharp ends

Disadvantages of Nerf Bars:

1. Can be a bit difficult to install lights on
2. Stepping in and out of the car has to be done a bit more carefully as the steps are in a very specific location


Side Steps

The side step is the simplest of the three as well as the most diminutive. It was primarily used in large trucks but have been implemented into the world of regular cars as well. It is a simple step that attaches just underneath each door. It can also be folded away when not in use. If you want something that is subtle and can be stowed away out of view then this is the option to choose. This method often requires a little drilling as most cars do not come with screw holes for them which in turn could mean that your car's warranty can get voided. They also support the least amount of weight.


Side step


Advantages of Side Steps:

1. Simplest of the three
2. Can be folded away when not in use

Disadvantages of Side Steps:

1. Can void vehicle warranty
2. Supports least amount of weight


Comparison Between Running Boards, Nerf Bars and Side Steps

Running boards


What Is Our Recommendation If You Own a Jeep Wrangler?

We briefly touched on this earlier. The Jeep Wrangler JK is an iconic car with a very characteristic look. A side step or a running board would spoil that look but a nerf bar would fit its image perfectly. We came across this wonderful nerf bar specifically made for the Jeep Wrangler JK by Oedro and we have been completely blown over by it and here is why: I. It is one of the sturdiest nerf bars out there. It has 3 base plates instead of the traditional 2 making them a lot stronger and structurally sound. II. There is a rust-proof layer between the inner steel and outer water paint layers that keeps rust and corrosion away and ensures that these nerf bars stay in shape for a long period of time. III. The carton box it is shipped in is made of 7 layers of corrugated cardboard which keeps the Oedro nerf board safe during shipping and transit. IV. It is specifically designed for the Jeep Wrangler JK making it a perfect fit.


Running boards


Final thoughts:

These might seem like a small addition to a vehicle but are immensely useful and improve the safety and convenience of the vehicle quite considerably and as such we highly recommend installing one of these.


<<< Why OEDRO? >>>

<<< Difference between Floor Mats and Floor Liners >>>